Pallet shelf

Well, of course I’m using pallets, again. I collected a bunch a couple of years ago and need to use them up before I can pick up more! (Good thing I don’t have a hubby to gripe about my pallet hoarding problem.) HA!

 

You see ALL the time on Pinterest about how people take this old dirty ugly pallet and turn it into a shelf or art or something.  Well, I thought I would give it a try. Mostly because I needed to make room in my cabinets for other stuff and my mugs really didn’t need to take up the WHOLE cabinet, but partly because I wanted to see if it really was just that easy.

 

It IS just that easy, actually.   It’s all about knowing where to cut the pallet.  

 

Once you get it cut down, then it’s just a matter of sanding everything THOROUGHLY, then applying your paint of choice. 

Here’s what it looked like after I lightly spray painted it with some white.  It was a light coat because the paint can keptclogging and eventually just stopped entirely. After messing with it for a while, I just gave up and decided I liked it well enough.

 

Then, my tall tumblers didn’t really fit down into the space between the slats, so I just took some other leftover wood from the pallet wall I did, (I should write that up, also, eh?) and added the red accent shelves with my Ryobi Brad Nailer.  

Lastly, I screwed mug hooks into the wood, and called it done.

 

Of course, the hanging it part was pretty tricky.  I wound upusing my stud finder (wonder what would happen if I walked around Home Depot checking all guys with it) to locate the studs in the wall above my coffee bar, and then screwed it into the wall.  Remarkably, it is still hanging 24-hours later.

 

Total Cost: Mug hooks - $4.00

Total Time: About an hour, mostly for paint drying

Outcome: SUCCESS!!

No go Make-Do something of your own.

Pallet pumpkin

It look so easy on Pinterest, doesn't it? You just take a pallet, use a jigsaw to cut it apart, and turn it into a pumpkin for your front porch. "It's so easy," they say. "Anyone can do it." If so, then I should be able to do it. And I certainly have pallets. 

So I pulled out my Reciprocating saw, and started cutting. I realized very quickly that it made good work of the wood, but whoever said it would cut right through nails must of had a different brand of saw.

I finally gave up on cutting through the nose, and just cut around the nails. Then I had a much more manageable section of pallet with which to work. So I took it over to my sawhorse.

I sketched out a pumpkin shaped using a pencil on the wood, then got out my jigsaw and began to try and cut out that outline. It works really well, except for when it got to the hall thicker cross pieces. For that, I had to get out my circular saw. By then, I had every saw I owned sitting on my sawhorse table for use.

Once you get it cut out, you really are pretty much done. That is the hard part. From there it was just spraying it with several coats of orange spray paint.

Oh, after gluing up the piece that did not have an anchor because I cut the nails in the wrong place.

When I first painted it, the kid said it needed a longer stem, so I went back and cut more off the top so that it would have a more pronounced stem.

Then I went back over the stem section with some green paint, let everything dry, and voilà! A reusable pumpkin for my front porch.

Oh! Somewhere during all of this, I did sand everything thoroughly. At any rate, it's done and it was basically free, and I'm very happy with it. 

I will probably try and make larger versions or smaller versions for subsequent years so that I can have a grouping. But this year I'm calling it good enough.

Cost: free, materials on hand. 

Time: one afternoon

Outcome: SUCCESS!!

Now go make-do something of your own! 

Pallet walkway

I really thought I had already talked about this. It was a very interesting project that I did last summer. But it turns out, I've not posted it. OOPS!

So, 4-years ago I bought this house. One of the big selling points was that it came with a really amazing shed that had electricity and storage and all kinds of interesting things already in residence. 

The issue was that I have two dogs, and getting to the shed in the dark or when it has rained was always a less than pleasant experience. 

I put down those cement stepping stones, but when I re-did the entire yard last summer (Wait, I haven't talked about that yet either? Double oops), the pavers became less than practical. 

I really have tried to use reclaimed resources as much as possible, because I don't have the $$ to spend, and I had found some really great old boards and talked a friend into helping me haul them home. But I was at a loss as to how to make them a raised walkway without spending tons of money on brick or rock or more wood. 

 

One day, I was staring at the pallets I had left from another project and an idea popped into my head. I quickly borrowed a truck and brought home more pallets and started to plan. 

First, I layed down some landscape fabric to stave off grass and weeds from growing up under my walkway. Then I started placing the pallets down, with an idea of them providing as much support as possible. 

It took some thinking to avoid big empty spaces, and since I wanted a clear boarder, I added in several 2x4s cut to length in spots, but finally I was able to lay my reclaimed planks. 

I did have to build a transition stoop at the shed doors, as the pallets were higher than the door clearance would allow. The previously mentioned stash in the shed provided excellent wood for that. 

I used long deck screws to connect the planks to the pallets, added in some old landscape border I pulled from another location in my yard, and used some bricks gifted from a friend to finish it out. 

I really like it, actually. It is very functional, and the wood was already weathered, so the look was right. 

NOTE: As you can see, a couple of boards were pretty warped, and over the last year, as I have seen long boards laying around, I have hauled them home and used them to replace those warped boards.

I've also added in some of those Dollar Tree solar stake lights so I can see the path in the dark. I need to get out there and mow so I can post an after-after picture. 

Total time: a solid weekend, with the hauling and placing and cutting

Total cost: $8 for the box of deck screws. 

Outcome: success!